Linux 네트워크 연결 속도 확인
2014.08.21 14:44
현재 연결된 리눅스의 링크 속도를 궁금할때
mii-tool 과 ethtool 명령어로 확인이 가능하다.
mii-tool -v 엔터
eth0: negotiated 100baseTx-FD, link ok
product info: vendor 00:50:43, model 2 rev 3
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
eth1: no link
product info: Intel 82555 rev 4
basic mode: autonegotiation enabled
basic status: no link
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
하지만 mii-tool 은 100Mbps 까지만 확인이 된다.
동일 장비에서 ethtool 로 확인한 결과는 아래와 같다.
ethtool eth0 엔터
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
댓글 0
번호 | 제목 | 글쓴이 | 날짜 | 조회 수 |
---|---|---|---|---|
9 | 리눅스 하드디스크 배드 블럭 점검 badblocks | Kim | 2014.08.21 | 6428 |
» | 네트워크 연결 속도 확인 | Kim | 2014.08.21 | 5370 |
7 | ip_conntrack: table full, dropping packet | Kim | 2014.08.21 | 5095 |
6 | HOSTNAME | Kim | 2014.08.21 | 4925 |
5 | 서버 리눅스 핑막기 | Kim | 2014.08.21 | 5196 |
4 | 네트워크 재시작 | Kim | 2014.08.21 | 4988 |
3 | Bad Sector 확인 | Kim | 2014.08.21 | 5396 |
2 | 아파치 현재설정 확인 | Kim | 2014.08.21 | 5211 |
1 | Max Clients 수정 | Kim | 2014.08.21 | 4716 |